AVPro 100m USB 2.0 via HDBaseT™ Extender
This USB extender kit comes with two parts: a transmitter unit, and a receiver unit. When you connect these two ends with any standard category cable, you can transfer USB signals with almost zero latency from end to end. By converting the signal to a category cable, you can deliver these signals long distances without interrupting the data flow, thanks to HDBaseT technology. 

     This extender helps provide the ideal distance connection for the web camera, interactive display or smartboard, keyboard and mouse, and other USB devices for remote conferencing.
     ​
     We built this extender to work with A/V over USB, but that doesn’t mean it can’t pass other types of USB signals. Audio/Video can carry a lot of data; It is a much more taxing signal than sending an email or surfing the internet. So, this unit has been optimized for the amount of data that can pass through. This, in turn, works out for every other USB signal, allowing you to send keyboard commands, connect to remote hard drives, and many more options than just extending your USB camera feed.
Extend USB Signals
The USB 2.0 specification only allows for signals to travel 16 feet 5 inches and remain stable. With this solution, you bump that up to 328 feet! This allows you to keep computers and other USB devices in secure locations.
Category Cable
With AVPro Edge’s USB 2.0 Extender, you can still use Cat 5e.
Built-In USB Hub
Extend four signals at once with the built-in USB hub, meaning you can have 2 mics and 2 cameras. Or, you could have a keyboard, mouse, camera and a mic all connected at the same time, and each one would be as if it was directly connected to your computer.
Power Over Ethernet (PoE)
You only need to power one end of this signal extension set alongside, with Power over Ethernet (PoE) the power travels over the same category cable, along side your data, delivering a power to the other end.
Optimized for Teams and Zoom
Many USB connections are not able to handle the high data rate that comes from streaming and conferencing audio and video files at the same time, all needing to be delivered in sync. This solution has been built to reliably deliver any resolution, timing, and audio type that is allowed in the USB 2.0 specification, including 4K.